Canon Service Tool V3600
Canon service tool v3600: How to reset your Canon printer
If you own a Canon printer, you may encounter some issues that require you to reset the printer. For example, you may get an error message that says "ink absorber is almost full" or "ink absorber is full". This means that the waste ink pads inside the printer have reached their limit and need to be cleaned or replaced. However, cleaning or replacing the ink pads is not enough. You also need to reset the ink absorber counter in the printer's memory, otherwise the error message will persist.
One of the service tools available for Canon printers is the Canon Service Tool V3600. In this article, we will show you how to download, install, and use the Canon Service Tool V3600 to reset your Canon printer.
Canon service tool v3600
What is the Canon Service Tool V3600?
The Canon Service Tool V3600 is a software program that allows you to perform various maintenance operations on your Canon printer. You can use it to reset the ink absorber counter, clear the ink level, check the printer status, print test pages, and more. The Canon Service Tool V3600 supports many models of Canon printers, such as MG3600, MG3610, MG3640, etc.
How to download and install the Canon Service Tool V3600?
To download and install the Canon Service Tool V3600, follow these steps:
Go to [this link] and download the ST_V3600_resetters.exe file.
Extract the file using a program like WinRAR or 7-Zip.
Run the ST_V3600_resetters.exe file as administrator.
Follow the instructions on the screen to complete the installation.
You should see a shortcut icon for the Canon Service Tool V3600 on your desktop.
How to use the Canon Service Tool V3600 to reset your Canon printer?
To use the Canon Service Tool V3600 to reset your Canon printer, follow these steps:
Make sure your Canon printer is connected to your computer via USB cable.
Turn off your Canon printer.
Start the Canon Service Tool V3600 on your computer.
Holding down the stop button on your printer, press the on button. Keep both buttons pressed.
While holding the on button, press the stop button five times. Then release both buttons.
When the power light is on, the printer is ready for service mode.
Select your printer model from the drop-down menu in the Canon Service Tool V3600.
Select "Main" from the "Clear Ink Counter" section.
Click on "Set" to reset the ink absorber counter.
You should see a message that says "A function was finished."
Turn off your printer and then turn it on again.
Your printer should be reset and ready to use.
Congratulations! You have successfully used the Canon Service Tool V3600 to reset your Canon printer. You can also use this tool to perform other maintenance tasks on your printer. For more information, you can refer to [this video] or [this guide].